M series Skid Steer Loader
M series Skid Steer Loader
M series Skid Steer Loader
M series Skid Steer Loader
Operating Load: 300-950Kg
Bucket Capacity: 0.2-0.5cbm
Rated Power: 18.4-55kw
Watch Product Video
  • product details
  • technical parameters
●This series has compact design, small host width and good passability. Using luffing working arm. Ensure that a strong load-bearing capacity is achieved under a smaller width.
●The width of the main machine is the smallest among all sliding machine products. To meet the requirements of special operations. The M series has also improved ultra-low height products, the lowest height is only 1.4 meters.
●M series products adopt imported European and American hydraulic components. The control adopts the pilot servo system, which is sensitive in control and quick in response. It is the best choice for small space operations.
Model/ Technical parameter HW25M HW25M HW35M HW45M HW60M HW65M
Operating load (kg) 300 450 500 700 850 950
Max Speed(km/h) 9 10 10 12 12 12
Rated flux (L/min) 37 50 60 62.5 75 75
Tire(track) model 23×8.5-15 27×8.5-15 8.5-15 10-16.5 12-16.5 12-16.5
Rated power (Kw) 18.4 22 29.5 37 45 55
Fuel tank capacity (L) 25 45 60 70 70 80
self weight bucket (kg) 1500 2000 2300 2700 2800 3000
Bucket capacity (m3) 0.2 0.3 0.3 0.4 0.4 0.5
Overall operating height (mm) 3126 3430 3300 3980 4130 4130
Height to bucket hinge pin (mm) 2399 2633 2725 3080 3130 3130
height to top of cab (mm) 1813 1878 2000 2120 2170 2170
Height to bottom of level bucket(mm) 2399 2663 2558 2200 2250 2250
Overall length ithout bucket(mm) 1918 2262 2300 2710 2810 2810
overall length with bucket(mm) 2560 2929 2950 3490 3595 3595
Dumping angle at maximum height(° ) 36 43 40 40° 40 40
Dumping height(mm) 1882 1971 2050 2380 2400 2400
Dumping reach(mm) 458 477 790 750 750 750
Rollback o bucket on ground(° ) 24 26 30 30° 30 30
Rollback of bucket at full height(° ) 97 95 104 105° 105 105
Wheelbase(mm) 722 818 897 991 991 1080
Ground clearance(mm) 148 167 140 185 210 210
Angleof departure(° ) 28 25 20 20° 20 20
Front turning radins without bucket(mm) 971 1135 1098 1168 1198 1204
Front tuning radius(mm) 1557 1819 1760 1550 1550 1550
Rear tuning radius(mm) 1146 1339 1296 1350 1450 1450
Rear axle to bumper (mm) 738 967 964 1108 1208 1082
Tread width,enterline to centerline (mm) 747 967 1080 1450 1500 1500
Width (mm) 900 1182 1350 1580 1682 1682
Bucket width (mm) 914 1267 1400 1680 1700 1700
Feedback form contact with us
Related Product
HW-JC45 Skid Steer Loader
HW-JC45 Skid Steer Loader
Hot HW-45 Skid Steer Loader - Shandong Hengwang Group Co., Ltd. is the best HW-45 Skid Steer Loader ...
Learn More
HW-JC60G Skid Steer Loader
HW-JC60G Skid Steer Loader
As the largest HW-JC60G Skid Steer Loader manufacturer in china, Shandong Hengwang Group Co., Ltd. s...
Learn More
HW-JC65GH Skid Steer Loader
HW-JC65GH Skid Steer Loader
Quality HW-JC65GH Skid Steer Loader suppliers & exporter - all products made in China....
Learn More
Product Catalog